How to Install a Backup Camera on a Truck (Full Installation Guide)

A couple of decades back, trucks used to be huge, and there is no safety for the drivers due to heavy stress. There is no proper safety equipment for trucks due to their size and purpose. But the advancement of technology brought up fantastic equipment for the safety of your trucks.

A Backup camera is a machine mounted inside and backside of the car to view and get updates about the surroundings of the truck to avoid accidents. Backup cameras make the reversing tasks in the parkways and on difficult roads to prevent collisions.

If you would like to install this camera, join the discussion about how to install a backup camera on a truck

How to Install a Backup Camera on a Truck/Pickup

Backup camera technology developed into an advanced state from the past decade. There are different types of backup cameras for different kinds of trucks. Installing a backup camera is a bit tougher if you don’t know the right process.

If you own a truck, you can install many types of rearview cameras depending on the model of the truck. Backup cameras can be installed within less time and fewer hassles.

Installing a wired camera is a bit difficult than installing a wireless camera. In most of the trucks, people use wireless cameras as it is easy to use and quick to install. The camera can be attached to the vehicle’s license plate.

In a wireless connection, you can mount the camera on the clean windshield, and the rearview camera can be placed on the backside to receive the signals to get singles transmitted wirelessly.

If you are installing a wired camera to your pickup or chevy truck, you can follow this simple installation method. The most important thing is to take the wires carefully and connect the cables in the right position. It is a time-consuming task, but if you learn to switch the process efficiently, you can quickly do it.

If you own a truck that is less than ten years old, you can install a backup camera in these models. Before installing the camera, examine the audio function and display of the screen.

If you are going to install a camera on an old Dodge truck, you need to learn basic knowledge and the installation process. Otherwise, you will end up spending hours of time in the process.

Here is our list of recommended backup cameras for trucks

• LeeKooLuu Backup Camera
• Yakry Backup Camera

Backup Camera Installation Steps:

1. Mount the Camera

Remove the screws and take off the license plate from the truck. Fix the camera unit on the top of the license plate area and fix the screws with the wrench.

2. Route the Cables of the Camera

Truck cameras are typically bigger than other car backup cameras, but this should not cause any issues. Route the cables carefully all along with the truck by removing any obstacles through the license plate area.

3. Locate the Reversing Light Wire Cables

The fuse box consists of all the power cables tapped inside. In the box, you can find reverse light cables that you need to locate to connect the camera.

4. Prepare the Fuse Box

The fuse or transmitter box is designed with two power cables stripped around each other. You need to use these cables to connect the reverse light wires to the power source. Use a plier to power up the cables and connect the positive power lead and negative power lead to the transmitter box.

5. Connect the Camera to the Power Cables

The cables inside the transmitter box indicate where to connect the cables. You need to connect the video and power cables to the camera.

6. Organize Any Loose Car Parts

Once you fix the camera tightly in place, organize any loose car parts in a small pile so you don’t loose them. Secure the license plate and check to see if everything is working correctly.

7. Attach the Camera Video and Audio Receiver to the GPS

Attach the receiver cable to the GPS inside the truck. Make sure all the units are connected to the power source, and that’s it you are ready to use your backup camera.

8. Test the Camera

Test the camera if it is working correctly to avoid any malfunctions. Check the senses of the camera and power source of the cables to prevent any accidents.

Summary

As you can see, it is very simple to install a backup camera on your truck if you follow this hands on guide. You should be ready to do it by yourself now. Always make sure you take precautions while working on your vehicle, especially when connecting the power cables. Before attempting any electrical work, read the car manual thoroughly. We hope this helps

Stay safe and be smart!